no way you can unlock k800i besides going to a shop unlocking it, and nokia.. it might be unlockable by code for nokia.. not sure.. im not a nokia fan.. but i unlocked a AT&T Nokia 3100 before with a code.. just find a software google it nokia unlocker software or something like that. but be sure to check for virus before opening the files..
read my other post above i said i already google theres no way to unlock nokia 6300 or k800i. those phones need to be remote unlock (mainly pay for it to unlock no free way to unlock it now) stupid new techo lol
yea.. cant help you on that.. they put a new chip in new phones.. which must be remote unlock now.. no codes you can use to unlock phones.. sigh... good old phones can be unlocked by softwares.. but not must be remote unlock-.-
is there an unlock code for the samsung d900i by any chance or would u need to pay to get it unlocked?
@ bbes for Samsung D900i unlock, refer to code above, should do the job also. @ fookjay For K800i, you can use davinciteam but its 50 euros. Better bring it in to a shop would be cheaper. If you plan to buy code for nokia 6300, make sure its reliable cuz a lot of ppl use free calculator software and it wont work and it will only mess up your phone for good. Theres quite a few ppl in UK that can unlock it. Fonefunshop is one of the biggest there.
maybe the samsung d900i cant be unlock by code.. not sure.. and yea every kind of phone you want to unlock needs to be pay or just call your carrier and say your going oversea and see will they give you a code/instruction to unlock your phone. ex. locked w810i sony ericsson branded by cingular US, call 611, tell them your going oversea, they should send you instructions... not sure never tried
do u not need an imei number for the samsung then? and what if the wrong code is inputted, will the phone just get wrecked and stop working?
Nop, you dont need the IMEI. All you need is a different carrier sim card and power on the phone and put in those codes. Those codes can only reset and unlock, it cannot damage the phone from what i know and tested.
No. I only tried on D8xx series, Exxx series and some other ones, D900i nop. Try it, cant do you harm, that i can tell you.
cos wen eva i sell it.. its worth more... this is wot i found on some next site hope its useful to every 1... Added patch unlock for db2020: W850(i), K800(i), K790(i), K610(i), K618(i), V630(i), W710(i), W710(c), Z710(i), Z710(c), Z610(i) CID 49 and 51 Unlock works only with cable/box RS232 like Cruiser 4 in 1 or a USB Smart 4 in 1. Before unlock please check if phone's battery is charged at least in 50%. Procedure of unlock DB2020 CID49, 51: 1. Open KKClient v1.54, it will create directory "SLF_FILES" 2. Download SFL files from http://gsminfo.home.pl/_ftp/guar/Data/SFL_Files.zip and unpack into directory "SFL_Files" 3. Files must be in "SFL_Files" directory like for example X:\path_to_KKClient\SFL_Files\*.sfl where x: is your hard drive letter 4. Now KKClient is ready to work. Before unlock of each phone i strongly recommend to check if unlock of certain phone's firmware is possible or not ( for now it works only with USB cable ) 5. If application tells you that your phone's firmware is supported please change cable into RS232 in menu, press SETTINGS and then press DETECT, wait few seconds and select COM port and kind of cable/box, then set speed (i recommend 921600), select option "use RS232 communication" and press ACCEPT. 6. If you unlock it for the first time please check if phone communicates by RS232 - press "READ INFO" and connect phone. If you do not have Autoignition cable press shortly POWER button in phone for ignition. 7. If everything goes without a problem you have to choose option "Simlock CID49, 51" and press button "FLASH PHONE". 8. Wait until program finishes - it can take around 50 seconds. FAQ: What should you do in case of errors ? This method of unlocking requires few tricks and it may look like killing a phone. Do not worry - if you see any error please disconnect phone, remove and insert batter and check if phone powers on. If phone does not power on you have to flash phone only with main file (with the same firmware version, which was in the phone) and everything will be ok. Phone's firmware version was not supported, but I tried to unlock it. In this situation phone will be like 'dead', because there is no recovery file. You must flash phone only with main file and then everything will be ok, but it will need 1 credit. Because of it i recommend to always check before unlock if certain firmware is supported or not.
