Rmvb Converter

I only use the DVD format and batch mode, then use NERO 7 to create 4 episodes per DVD (with menu selection), output to the hard disk, then use DVDCOpy 2 to burn the DVD.
If I was you, I will only use the DVD, VCD or SVCD output format in WinAVI because I can then use NERO Express Videos/Pictures option to burn VCD, SVCD or DVD-Video.

 

okay i have the 6.2 one nd it has a popup on the video saying winavi video converter nd if i want to remove it i have to pay..

 

try using dvdsanta
download it on www.dvdsanta.com
i use it to convert all my rmvb files and it works great.
the program even allows you to burn the file into dvd format
another thing i like about this program that it says "if you want to burn the file there will be a huge DEMO watermark on the file" but when you do burn it the watermark goes away after 1 minute so you can actually enjoy the movie without the annoying watermark!!!

hope this helps!!!

 

You can try to download the free code from bt for WinAvi.

 

I might make a new thread about it

 

anyone who know how to convert rm file with dual language into dvd with dual audio? and with menu if it is possible, many thxs
i am looking for long time

 

I think you need to demux or demultiplex the file using virturdub or tmpgenc. You can then use nero vision to add the video than add the separate tracks of audio in editing. If both languages are in the same stero track (left and right) you would also need to separate the left and right track into different audio files using nero wave editor.

 

total video convertor, the old verison , such as 2.5. its the most easiest program ever used. there are sometimes the files won't be able to convert, but if i can convert, the output is really nice and clear.

 

I find the one of best converters is ConvertXtoDVD. It accepts nearly every file format and converts to DVD

 

use winavi 8. I rate it best. Just make sure you install all the needed codecs. and if you want to convert to rmvb make sure u have helix sdk

 

put down my vote for winavi converter as well.

 

I use ConvertXDVD, great program, easy to use and haven't had any trouble. Converts to DVD format to be watched on tv and such.

 

Hi I really hope this thread is still activating. I have been converting rmvb with winavi 9 to DVD with no problems at all, however with this particular one:

TVB Instinct:
Episode 28 : http://www.megaupload.com/?d=M700PBJF from this page http://www.dramasian.com/forum/showthread.php?t=21286&highlight=instinct

Anyway, when I convert with Winavi it only converts 36 minutes of the video but, the whole video is suppose to be 45 minutes. No matter how many times I do it, it remains to only convert 36 minutes of it.

I tried using the SUPER converter but, the problem is out of sync. SUPER can convert the whole video but out of whack and I have tried changing the SUPER settings so many times but, no use. Perhaps someone may know the proper settings on SUPER for converting rmvb to DVD or rmvb to MPEGII. I would be grateful if someone can tell me. Or why winavi 9 only converts part of this video. Could it be the video's problem.

I have attached the video data for anyone to have a look at it.

Thanks

General
Complete name : C:\Documents and Settings\Khode\My Documents\My Videos\Instinct\28.rmvb
Format : RealMedia
File size : 176 MiB
Duration : 45mn 22s
Overall bit rate : 543 Kbps
Movie name : HTTPFTPÊ×·¢:Ц¿´ïLë… - 28
Performer : bush
Copyright : HTTPFTP

Video
ID : 1
Format : RealVideo 4
Codec ID : RV40
Codec ID/Info : Based on AVC (H.264), Real Player 9
Duration : 45mn 22s
Bit rate : 479 Kbps
Width : 512 pixels
Height : 384 pixels
Display aspect ratio : 4:3
Frame rate : 25.000 fps
Bits/(Pixel*Frame) : 0.097
Stream size : 155 MiB (88%)

Audio
ID : 0
Format : Cooker
Codec ID : cook
Codec ID/Info : Based on G.722.1, Real Player 6
Duration : 45mn 23s
Bit rate : 64.1 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Bit depth : 16 bits
Stream size : 20.8 MiB (12%)

 

I use convert X with 5 eps per disk with no problem I can upload the file if anyone is interested in trying it out. http://www.sendspace.com/file/n9enxu

 

I use Tmpgenc Xpress 4.0... What so good about it? it is the quality, not quantity.

 

why use winavi v7 when v10 is out? i has customizable dvd menu and a lot faster

 

go to www.softarchive.net they got plenty application for convert rvmb to avi or other wise

 

i actually use winavi mp4 converter for most of my stuff which i like to put on my iphone and it is by far the fastest one. There are others that i have tried like SUPER, Ultra RMVB converter, Total video converter, but really the fastest would be WInavi MP4

 

Winavi looks like it's for PC users. What do you Mac users use?

 

ffmpegX with the Real codec should do it.

http://appleclinic.wordpress.com/2008/04/21/convert-rmvb-avi-ppc-intel/

Those are instructions for converting rmvb to avi, but ffmpegX can export to DVD too. If you run into problems, try renaming your .rmvb file to .rm instead.